Set wireless remote control (CF RX TX)
3 functions
Cargofloor.com
Page 8
Version 01 / 05-07-2021
REMOTE CONTROL (CF-TX) 3-FUNCTIONS
Switching the remote control on/off
The I/O switch on the back of the remote control interrupts the power supply from
the battery. This switch must be turned on only
once
.
E-control
The remote control for E-controlled Cargo Floor systems
It is has three buttons, which work as follows:
Button 1 (load)
. By pressing this button the system will load, by releasing it the system
will stop.
Button 2 (unload)
. By pressing this button the system will unload. Pressing this button
again will stop the system (or pressing button 3, stop).
Button 3 (stop).
Stops the system.
B-control
The remote control for B-controlled Cargo Floor systems
If you have a Cargo Floor system with B-control, you can remove the E sticker from the control and
replace it with the B sticker.
It is has three buttons, which work as follows:
Button 1 (ON PULSE as pulse contact).
By pressing this button the system will switch
on, by releasing it the system will switch off.
Button 2 (ON HOLD as hold contact).
By pressing this button the system will switch
on, by pressing it again will deactivate the system (or press the stop button 3 to stop).
Button 3
(Stop).
Stops the system.
Replacing remote control batteries
Remove the back of the remote control by unscrewing the 5 screws.
Replace the 2x 1.5 V AAA batteries. Use alkaline batteries for optimal performance.
Screw the back of the remote control back into place.
I/O switch
