Caretero TOYZ RINGO, User Manual

Page: 21 / 36

21
INSERTING BATTERIES INTO THE RC
To power the RC, two AA 1,5V batteries are needed. Remove the battery lid by unscrewing the screw on
top of it. Remove the lid. Insert the batteries as shown on the diagram inside the battery container. Place
the lid back on and lock it by tightening the screw.
1. To pair the remote control with the vehicle, turn on the vehicle, then press the forward and reverse
buttons simultaneously for 2-4 seconds. When the LED changes from flashing to long bright light, the
connection is successful. If the LED is blinking only, it means connection has failed. Replace the
batteries and repeat the above steps. There is no need to pair the vehicle again after turning off the
power.
2. The buttons on the left side of the remote control are used to control the car's forward / reverse travel.
3. Buttons on the right side of the remote control for turning left / right.
4. The button (3) is used to select the driving speed.
5. The button (7) is used to stop the vehicle.
The vehicle will stop when there is no communication with the pilot.
NOTE: Normal batteries cannot be recharged.
Remove exhausted batteries from the remote control.
Rechargeable batteries (rechargeable batteries) are only charged under adult supervision.
Batteries (rechargeable batteries) must be removed from the remote control before charging.
EN PLAYER FUNCTIONS
EN REMOTE CONTROLLER FUNCTIONS
1. USB input
2. Bluetooth
3. Playing music “PLAY” / Stop music
4. Volume control “VOL-”
5. Volume control “VOL +”
6. Display
1 2 3 4 5 6