9
FOOTREST ADJUSTMENT
Press both buttons located at the sides of the footrest and set the footrest in the desired position (
5.1
).
You can place the foot shelf in one of three heigh slots (
5.2
).
USING THE TRAY
Pull the lever located under the tray. Slide the tray into the guides on the sides of the chair and release the lever to
lock the tray in place (
5.3
).
To adjust the position of the tray, pull the lever and slide the tray forwards or backwards (
5.4
).
The upper part of the tray can be taken off (
5.5
). After removing the tray, you can hang it on the rear legs of the chair
(
5.6
).
BACKREST TILT ADJUSTMENT
Pull the lever located on the back of the backrest. Set the backrest tilt to the desired position and release the lever.
There are 3 positions of backrest tilt available (
5.7
).
ADJUSTING THE CHAIR HEIGHT
Kneel in front of the chair. Press both red buttons under the seat and lift or lower the seat (
5.8
). Release the buttons
to lock the position of the seat.
USING THE 5-POINT BELTS
To unfasten the belts, press the button in the middle of the buckle (a) and pull the side belts (b) away from the buckle.
To fasten the belts, put the latches of the side belts (b) into the buckle (a). To adjust the length of each belt, use the
plastic rings (c) on each belt (
5.9
).
To change the belt height, flatten the end of the belt and pull it throught the slot in the backrest. Put the belt through
the slot on the desired height and twist the belt tip again to lock the belts in place (
5.10
).
FOLDING THE CHAIR
Remove the child from the chair and place the tray on the rear legs. Press the levers (a) on the rear chair legs. Push
the rear legs and release the buttons (
5.11
).
5
CHAIR FUNCTIONS
6
CLEANING AND MAINTENANCE
INSTALLING THE LEG LINKING ELEMENTS
Press the metal latches and put the ends of the leg tubes into the holes in the plastic linking elements (
4.5
).
Install the linking element with wheels at the back of the chair. Install the linking element with feet on the front side of
the chair.
The upholstery and the frame should be cleaned with a damp cloth with addition of soap. Do not use strong
detergents as they may damage the plastic parts of the chair. Please check all movable parts of the chair regularly
and lubricate them with silicon oil. This chair is made for indoor use only.
Summary of Contents for MAGNUS
Page 4: ...3 4 1 4 2 4 4 4 5 5 1 4 3 4 3...
Page 5: ...4 5 7 5 2 5 3 5 4 5 6 5 5...
Page 6: ...5 5 8 5 8 5 11 5 10 5 9...
Page 15: ......
