5
occurred, wait 30 seconds for the base to
reset and repeat steps 1 & 2.
• Up to 5 Two-way pendants and Emergency
Wall Communicators plus 4 Waterproof
pendants, for a total of 9, can be taught to
each base. If a pendant has been lost or
replaced - erase all pendants and relearn
all current pendants and any Emergency
Wall Communicators.
At a later point in time, you might want to erase
your previously learned pendants. You can erase
all previously learned pendants by simply holding
down the red
Code Learn
button at the back of
the Base unit for 8-10 seconds. you will hear the
confirmation of “Previous Pendant Codes Erased”
from the Base unit. After that, you can program a
new pendant to the base unit following the steps
above as desired.
Battery Check / System Check:
The CaretakerSentry has a built-in battery tester
and method to check the whole system. You
should make yourself familiar with these tests
from the main CaretakerSentry users manual.
If you do not have these important safety
41915 instructions v7-1.indd 5
7/11/2017 10:58:36 AM
