6
3
Main Parameters
•
Rated voltage: 110V AC
•
Rated frequency: 60Hz
•
Rated power:900W (
KH294
)
4
Operating Instruction
NOTE: You must fill in water before turning on the foot bath massager. Never try to
operate this device without having water inside the container.
1 Stabilize the Device
Allocate the appliance where you want to use, LOCK the Mobile Caster
(4 wheels on bottom) so that the appliance will not move during use.
Filling in Water
You must fill in water before turning on the foot bath massager. Never try
to operate this device without having water inside the container. After
filling in water, plug in power source.
ON/OFF
Press ON/OFF button, all functions (except "Temp+" and "Temp-") are in
working. The two-digit display shows the current water temperature;
Press the ON/OFF button again to turn off power completely.
2 Heating/water wave
Press "Heating/water wave" button, "Heating/water wave" indicator light
shows green, the water bump starts to water jet. At this moment,
"Temp+" indicator light will show red color if the current water
temperature is less than the setting temperature, meanwhile, the heater
starts to run until the final water temperature reaches the setting value,
then , the "Temp+" indicator light is off, and "Keep warm " indicator
light shows green.
Summary of Contents for KH294
Page 5: ...5...
