Carel PlantWatch, Installation And User Manual

Page: 42 / 48

3ODQW:DWFK
Cod. Carel. +030221221 – rel. 1.0 dated 20/02/01 36
48,&.&21),*85$7,21
PlantWatch is factory-configured with parameters that can be adapted to a vast number of applications. In this way, a solution
can be provided to the user who requires quick installation of the product, and the setting of just a few fundamental parameters.
The following operations must be performed after installing the network of instruments and any peripherals (printer, modem):
Power PlantWatch and the instruments Carel connected to it (Ir32, MPX, pCO,...)
Configure the addresses of the instruments
Power the PlantWatch printer board, printer, external modem, if featured
Access the configuration menu, entering the default password: 3
Select the
$XWRPDWLFXQLW FRQILJXUDWLRQ
menu, screen
J
and start the procedure
When the procedure is complete and the display shows all the peripherals connected, proceed to the following step. If some
peripherals are not connected, the configuration can be continued by manually selecting the type and the address of these
peripherals
Select the
8QLWFRQILJXUDWLRQ
menu, screen
J
and assign the names of the units in a way that is coherent with the function they
perform (the peripheral type field has already been set by the automatic procedure, and should not be changed)
Assign, from screen
J
the name and physical address of the installation, making sure not to use names or addresses already
attributed to other installations
Configure, if present, the data required to activate the remote signals; FAX, SMS, call to data centre.
Set the logic of the alarm relay as per the connections already made.