manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, User Manual, Page: 123 / 246

Share
Download
CareFusion Pyxis MedStation 4000 User Manual Download Page 123

Site-specific options

Pyxis MedStation 4000 System Console User Guide

113

•

Exclude “UNKNOWN” meds from Ordered Meds Not Loaded 
Report

—Do not display medications whose name is identified as 

UNKNOWN on the Ordered Meds Not Loaded report.

•

Show HOLD orders on selected Inventory Reports

—Include orders 

that are on hold on the Inventory reports.

6. In the Inventory, System, Activity, and System Activity sections, select the 

check boxes for information that you want to display every time on any report 
in that category:

•

Brand Name

—Displays the medication’s brand name.

•

Alt ID

—Displays the medication’s alternate ID.

•

Units of Issue

—Displays the item’s number of units of medication per 

refilling package.

7. Click 

Save

.

8. In the confirmation message that appears, click 

OK

.

Specifying maintenance options

Use the Maintenance page to specify the time period of data available to console 
reports and the maintenance schedule for each maintenance task. You can also use 
it to begin running maintenance at any time, even if it is not scheduled.

NOTE

Do not change the Maintenance options without assistance from a CareFusion 
representative.

Option

Description

Users

Deletes expired users from the system.

Patients

Searches the database for patients that have had no transactions for a 
period longer than that specified in the Discharge if Inactive for field 
described later in this section. Patients that have been inactive for longer 
than this time are discharged. This task also deletes discharged patients 
that have been in the database longer than the hold time.

Orders

Profile mode only.

Activities

Transaction activities that have been in the database longer than the hold 
time are deleted.

Service Messages

Service messages that have been in the database longer than the hold 
time are deleted.

Archiving

Generates new archive files, deletes old archive files from the hard drive, 
and updates the archive file Date field in the Archiving dialog box. For 
more information on this process, see 

Scheduling archive maintenance

 

on page

157

.

Summary of Contents for Pyxis MedStation 4000























































































































































































































































Reviews:

No comments