CareFusion Alaris 8110 series, Service Manual

Page: 118 / 172

7.4 ORDERING PARTS
Parts can be ordered by writing or calling
Car eFusion Customer Care (refer to
"General Contract Information" page at
beginning of this manual). When requesting
a part, provide the following information:
• Instrument name and model number; for
example, Syringe Module, Model 8110.
• Instrument software version. Refer to
Alaris
®
System DFU for directions on how
to view software version.
• Part number.
• Part description, as provided in parts list.
• For labels, specify required language.
NOTE:
Replacing the Complete Housing
Assembly, Force Sensor Assembly or Logic
Board Assembly in a Syringe Module with
version
7.0
or earlier software requires
special calibration equipment. Until version
7.1 or later is installed in the Syringe Module,
these assemblies must be replaced at the
depot. Call Car eFusion Technical
Support (
800.854.7128
ext.
6003
) for
assistance and information.
ILLUSTRATED PARTS BREAKDOWN
Syringe Module
7A-2
Alaris
®
Syringe Module (8110 Series)
Alaris
®
PCA Module (8120 Series)
Technical Service Manual