Carefree of Colorado
4
C
ONTROL
P
ANEL
LED Indicator
o
LED is Steady ON when power
is ON.
o
LED will dim and fast flash
when a function key is pressed.
o
LED will slow flash if a motion
sensor is disengaged or
otherwise disabled.
Power
Press ON/Press OFF. The power switch must be ON before any awning
functions can be used. When power is ON, the LED indicator will illuminate.
The Direct Response Auto-Retract is active when awning power is on.
CAUTION
Set the power switch be to OFF whenever the
awning is not being operated and during transport. This acts as a
safety to prevent the awning from being accidently opened.
Extend
Press and release. The awning will extend out to the full extension and
stop automatically.
During normal operation, the awning will extend out completely then roll
back slightly to provide tension to the fabric.
NOTE:
If the optional Carefree ignition lockout is installed, the system will
disable the extend function while the vehicle ignition key is in the ON position.
Functions will return to normal operation when the ignition key is turned OFF.
Coach manufacturers may install their own lockout design. Refer to the
coach literature for AC power for accessories.
Stop
Press and release. During extend and retract functions, the operator may
stop the awning by pressing this button.
Retract
Press and release. The awning will retract and stop automatically when
the awning is fully retracted. When the button is pushed, the LED will
illuminate and stay on until another function is activated.
All function buttons are press ON. The auto-functions continue until the awning is fully
extended or fully retracted or when the button is pressed a second time to stop the
function. It is not necessary to hold the button while the function is active.
See Page 5 for descriptions of the Auto-Retract settings.
RTA039a
Power On/Off
Motion Sensor
Low
High
Awning Control
Extend
Retract
Stop
Extend
Single Awning
Motion Sensitivity
Low High
LED Indicator
Power
On/Off
Retract
Stop