M
ANUAL
P
ATIO
A
WNINGS
Service
Manual
Carefree of Colorado
12
052876-301r5
A
TTACHING THE
H
ARNESS TO
F
ABRIC
W
RAP
When replacing the canopy only or replacing the canopy harness, it is necessary to attach the cable to the
inside of the wrap.
For vinyl canopies with Weatherguard, the harness is routed in the seam of the Weatherguard, no
additional attachment is necessary.
For other wraps follow the directions below:
1. Open the awning to access the inside surface of the wrap.
2. Clean the inside surface of the wrap.
3. Attach the harness to the inside surface.
3.1. For Alumaguard: Use 1" by 2" pieces of Velcro (loop) taping
the harness on each slat between the joints.
3.2. For FLXguard: Position the harness approximately 3/8" from
the edge of the material. Attach using a 1" x 6" piece of clear
tape (the tape is a special bond tape available from Carefree).
1" x 2" Velcro "Loop"
ALUMAGUARD
LED008a
FLXguard
1" x 6" Clear Tape
Position Wire
3/8" From Edge
