B
UENA
V
ISTA
5
F
REEDOM
R
OOF
M
OUNT
R
AFTER
1. Locate the 3/4" square plug and press fit into the small channel.
2. Locate the Freedom Roof Mount case connector (marked with "RM"), slide it
over the small channel and plug. Note the orientation as shown.
3. Attach the connector using two (2) #8 x 1/2" truss head screws through the
connector and bottom holes of the small channel. Do not over tighten.
4.
Insert the lead rail end plug into the large channel. Note the orientation as shown.
5. Attach the end plug by pressing the push-in clips through the channel and
into the end plug.
6. Repeat for the second rafter.
V
ERTICAL
A
RM
R
AFTER
1. Locate the 3/4" square plug and press fit into the small channel.
2. Locate the vertical arm rail bracket and slide it over the small channel and
plug. Note the orientation as shown.
3.
Attach the bracket using two (2) #8 x 1/2" truss head screws. Do not over tighten.
4. Insert the roller tube end into the large channel. Note the orientation as shown.
Attach using two (2) #8 x ½” truss head screws. Do not over tighten.
5. Repeat for the second rafter.
3/4” Square Plug
Freedom Roof Mount
Connector
#8 x 1/2”
Truss Head Screw
(2 plcs)
Push-In Clip
(2 plcs)
Leadrail
End Plug
(2 plcs)
Latch Lever
(ref)
we011c
Freedom RM
(Roof Mount)
3/4” Square Plug
Roller Tube End
Latch Lever
(ref)
Vertical Arm
Rail Bracket
#8 x 1/2”
Truss Head Screw
(4 plcs)
Rubber
Bumper
we011d
