6
Example to program a single code number:
Press 1, 2, 3, 4, 5, 6 and the
*
key. The Yellow LED will turn on.
Enter your code number - a two (2) to six (6) digit number, then Press the # key.
The Yellow LED will blink one (1) time.
Press 4 # for Relay 1. The Yellow LED will blink two (2) times.
Press the
*
key. The Yellow LED will turn off.
To operate the gate or door, enter your code number and Press the # key.
The Green LED will turn on for 1 second.
To remove or delete a single personal code number:
Step 1:
To delete a code number, enter your program number or the factory program number 1, 2, 3, 4, 5, 6 and Press the
*
key. The Yellow LED will turn on.
Step 2:
Enter the personal code number to be deleted and Press the # key. The Yellow LED will blink one (1) time.
Step 3:
Press 20 # and the keypad will search its memory to delete the code number that you entered. When complete, the
Yellow LED will blink three (3) times.
Step 4:
Press the
*
key. The Yellow LED will turn off.
To delete multiple code numbers repeat steps 2 and 3 before continuing on to Step 4.
Erasing all personal code numbers:
***Warning: Performing this command will remove all personal code numbers from the memory.
Step 1:
Enter your program number or the factory program number 1, 2, 3, 4, 5, 6 and
Press the
*
key. The Yellow LED will turn on.
Step 2:
Press 00 # The Yellow LED will blink one (1) time.
Step 3:
Press 00099 # to erase the memory. This may take up to 10 seconds.
When complete, the Yellow LED will blink two (2) times.
Step 4:
Press the
*
key. The Yellow LED will turn off.
Change factory programming code (1, 2, 3, 4, 5, 6) to a new programming code:
For security reasons you should change the factory program number 1, 2, 3, 4, 5, 6 to a new program number from 2 to 6
digits. Or you can use the factory program number 1, 2, 3, 4, 5, 6 (not recommended) to enter into a programming mode.
Your new program number or factory program number allows you to enter into a programming mode only.
To program a new program number, follow the next 4 steps below. Write the new program number in the space provided
below. Remember, after you have programmed your new program number 1, 2, 3, 4, 5, 6 will no longer work.
Step 1:
Enter factory program number 1, 2, 3, 4, 5, 6 and Press the
*
key. The Yellow LED will turn on.
Step 2:
Enter your new program number from 2 to 6 digits and Press the # key. The Yellow LED will blink one (1) time.
Step 3:
Press 22 # The Yellow LED will blink two (2) times.
Step 4:
Press the
*
key The Yellow LED will turn off.
Write your new program number here:
_________________________
Keep This In A Safe Place
