CareCo Tuni Spectra, Owner'S Handbook Manual, Page: 4 / 12

Ensure rollator is level to the ground before
using. All screws must be tightened, ensuring
there is no movement.
DO NOT hang anything on either side frame. This
will: (A) cause side tube to bend, and make the
rollator unstable, and/or (B) cause rollator to tip,
resulting in injury or damage.
Remove the rollator from the box. Lay the
rollator down on the floor with the handle tubes
on top. Unhook the red levers from the inside of
the leg tubes. Push the handle tubes forward so
that they are standing upright at a right angle to
the leg tubes, as shown in figure 1:
Pull the black metal levers on each side
backwards to push the washer inwards. Clasp
into the plastic slot on the leg tubes - this will
“snap” into position as in figure 2:
Read Before Use
Opening
Figure 1