7
(Figure 6)
fold inward
Installation / Adjustment of the handle
Note: when the product is exchanged from rollator to a transport chair, the handle bar needs
to be pulled out of the frame, then turned by 180 degrees, then inserted into the frame again.
Handle this process with care in order to protect the brake system. To adjust the height of the
handle bar loosen the knob, and adjust the handle to the desired height. The user should be
able to rest their hands comfortably on the handle bar - once this position is reached, tighten
the knob to lock in place.
Assembly / adjustment of brake cable
Note: Do not pull the brake cable out of the handle tube in the condition of installing or
adjusting the handle height.
Note: the brake cable already moves through inside the handle tubing while usage.
Do as following:
1. Lock the adjustment knob: turn it counter-clockwise.
2. Release the adjustment knob: turn it clockwise side.
Do as following:
Check proper the tightness---please repeat the above steps to get proper
position.
Use of hand brake
1. Pull the the brake up towards the hand grips.
2. Do one of the following:
A. REMAIN STATIONARY—hold the brake handle UP:
B. CONTINUE MOBILITY – release the brake handle
