The stepper tubes have integral anti-tip wheels.
The height of the wheels can be altered by
pulling the round disc on the stepper tube
whilst adjusting the wheel height as required.
To raise the front castors (when mounting a
kerb for example). To use, push down on the
stepper tube with a foot.
Approach the kerb head on. Then the attendant
uses the stepper tube to raise the front castors,
and lowers the front castors on the raised kerb.
Finally the attendant should push the
Anti-tip wheels
Use the stepper tube
To mount a kerb
Stepper Tube and Kerbs
!
!
WARNING
WARNING
Ensure that the wheels on both stepper tubes are
set at the same height.
Do not raise the front castors by pushing down on the push
handles as this could result in damage to the wheelchair.
