5
■
Do not use your scooter under any of the following conditions:-
On roads with heavy traffic or roads that are muddy, gravelly, bumpy, narrow, snowed over,
icy, or canal towpaths not guarded by a fence or hedge. Keep away from places where the
wheels are likely to get stuck.
Do not drive at night or in rain, snow, fog or strong winds.
Do not drive your vehicle in an ‘S’ pattern or make erratic turns.
Do not take the scooter onto escalators.
UNDER NO CIRCUMSTANCES SHOULD THE SCOOTER BE USED AS A SEAT IN ANOTHER
VEHICLE (CARS, BUSES, TRAINS, ETC).
■
Electrical equipment
Do not use a mobile phone or other wireless communication devices whilst driving.
Always switch off the scooter and remove the ignition key before using a mobile phone.
Do not charge a mobile phone or any other electrical device from your scooter’s battery.
■
Automatic Power Shut Down
In order to avoid accidentally draining the batteries, your scooter is equipped with an
automatic power shut down facility. If the scooter is left switched on, after remaining
undisturbed for a period of 30 minutes, it will automatically turn off. When this happens,
simply switch your scooter off and back on and it will be ready to use once again.
■
Ramps, inclines and descents
Do not drive onto ramps that are greater than the specified gradient. Refer to the section
entitled ‘CLIMBING ANGLES’ in ‘7. SPECIFICATION’.
Always use a low speed setting when ascending or descending a gradient.
Do not drive on roads with uneven surfaces or potholes.
Slow down when driving uphill.
Do not make sudden turns when driving on gravel roads or ramps.
Always lean forward when climbing a steep hill.
■
Starting and Driving
1.
Make sure the seat is installed properly.
2.
Make sure the tiller has been secured properly.
3.
Fold down the armrests so you can rest your arms on them.
4.
Turn the power switch to ‘ON’. If necessary, turn on the headlights.
5.
Check the battery indicator to see whether there is enough power for your journey. If you
have any doubt about the remaining power, please recharge the batteries before departure.
6.
Set the speed dial to a position you feel safe and comfortable with.
7. Check the forward / reverse speed lever works correctly.
8.
Make sure the electromagnetic brake works correctly.
2 . S AF ET Y NOT ICE
