2
3
1. SET UP INSTRUCTIONS
1. SET UP INSTRUCTIONS
1. Remove all contents from carton and remove protective packaging, including the
cardboard panel between the rear wheels. The carton should contain the following:
Loop Brake Handles are
attached to the Frame by
Cables (2)
Backrest
Height Adjustment
Knobs (2) With
Bolts Attached
Vinyl Tote
Do not use the rollator if there is apparent damage and/or if parts are missing.
Hinged Folding
Mechanism
Backrest
Receiving Tube
2. Open frame by pushing down on the hinged folding mechanism so that the
hinged bar is level.
3. Insert the backrest, handles, and tote.
a. To insert the backrest, push pins on the outside of the backrest and insert backrest
into the brackets on the front of the rollator frame. Once properly installed, the
backrest should click into place and pins should protrude into the holes.
b. Unscrew the bolts and height adjustment knobs from handles and insert handles
into the frame of the rollator while making sure the cables are on the outside of
the frame.
c. Adjust the handle height as desired. Insert the bolt from the inside of the frame
so that the hex head fits snugly into the hole. Make sure both handles are at the
same height.
d. Firmly screw the knob until fully tightened, making sure that the bolt head is still
securely recessed into the frame.
e. Place the tote under the seat of the rollator, between the frame tubes. Secure
the tote with the snap button flaps.
4. Be sure all attached hardware is tightened securely.
USER WARNING
DO NOT USE YOUR ROLLATOR AS A WHEELCHAIR OR
TRANSPORT CHAIR
•
Use seat for stationary seating only
•
Never sit and push with your feet
•
Do not go up or down stairs, use on escalators or on moving walkways
•
Do not allow others to push you while seated
!
