Assembly Instructions
Operating Information
www.careco.co.uk
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
02
Breeze 8 -
Rollator
1. Remove all contents from carton.
2. Open frame and place upside-down on the floor. Attach one front leg (no brake) onto front of
Rollator. To do this, loosen the tightening knob anti-clockwise, located on the outside of the front of
the frame. Then slide the leg into the tube provided by pushing the button. You can now adjust the
height of the seat to your liking. Next, re-tighten the tightening knob with the button on the outside
of the frame, in order to secure everything in place. Repeat the process with the other front leg (no
brake) to assure that both legs are set to the same height.
3. Attach back legs (with brakes) using the same process, making sure the wheels are on the outside of
the Rollator and are at the same height as the front wheels. Affix brake cable to the black portion of
the leg using the “S” shaped clamp provided.
4. Insert handle tube into frame and set to desired height. Secure in place using tightening knob,
threading the knob in from the outside. Repeat for second handle, making sure both are set to the
same height.
5. Attach padded backrest by depressing the black thumb buttons and sliding into the black bracket.
Note that back rest can be folded up when not in use.
• Fully unfold the walker until the folding hinge under
the seat is locked in the open position.
• When the walker is fully unfolded, the seat can be
pulled down into position.
• Fold the backrest down before use.
• The height of the Rollator can be adjusted in two ways to accommodate many different users.
1. Remove tightening knob from handle.
2. Set handle to desired height.
3. Replace tightening knob into handle, making sure to insert
knob from outside.
4. Repeat for second handle, making sure both handles are set
to same height setting.
Unfolding the Rollator:
Height Adjustment
Handle Height Adjustment