c) INTENSITY:
Controls the intensity of the vibrations and can be used during any
mode. A light will turn on under high, mid and low to indicate which mode its in, to
change press the intensity button. When turned on it automatically starts on Mid.
d) HEAT:
Press the heat button to turn on a 15 minute cycle. Press again to turn off.
e) SHOULDER, SEAT, BACK, LEG:
Press any part of the body (Shoulder / Seat /
Back / Leg) to massage that part of the body at any given time.
Warning!
Massage & Heat function should only be used for a maximum of 30
minutes at a time with a minimum of 15 minutes resting period in between. Should
the handset or functions begin to over heat turn off and unplug the device and call
CareCo’s customer service.
Warning!
Never leave the chair unattended with the power on.
Warning!
Should the heating become uncomfortably hot even when on the LO
setting, switch off at the mains and contact CareCo Customer Services.
Warning!
Should the vibration not stop when commanded or malfunction in any way
switch off at the mains and contact CareCo Customer Services.
Please Note:
The massage functions are simulated by a relaxing and gentle
vibration. To feel the full benefit of these functions the heat and massage mechanism
is placed close to surface under the fabric, this is to maximise the features which the
Heat & Massage system provide.
Each massage cycle lasts for 15 minutes.
a) MODE:
Controls the vibration function/cycles on different parts of the body. When
turned on the function is automatically set to MODE #1 with Mid intensity.
b) ON/OFF:
Press the on button to run a cycle of 15 minutes on the massage
function. An amber light will turn indicate when function is on. Press again to turn off.
2.
REMOTE CONTROL – HEAT & MASSAGE HANDSET
Chair Position
Controller
Button Functions
as per Dual Motor
Handset above.
Heat & Massage
Controller
