background image

9

now to ProGram the nUmBers: 

If, for example, the first number to be called is ‘987654321’, then press the star (*) key first (bottom 
left hand key), then press the number 

“1” key

, then enter the phone number (987654321), and 

finally press the 

“#” key

 to end. If you hear a double beep, then the number has now been stored as 

the first emergency contact number. The setting procedures for the

 2nd, 3rd, 4th and 5th

 telephone 

numbers are the same as above except after the star key you press the 

“2” key

 for the second stored 

number and the 

“3” key

 for the third stored number and so on. 

As you enter the numbers they will appear in the Smart Dialler indication window. The letter P (short 
for Phone) and then the number 1 (indicating the first number is about to be stored) will appear prior 
to you entering the digits of the first number. After storing each number and pressing the 

“#” key

 

you will hear 2 audible beeps from the phone. This indicates that the storing of your phone number 
has been successful. It is important not to rush this procedure but take deliberate and careful note as 
you enter each key command. 

(To change the numbers at any time just overwrite using the same procedure.)

NOTE: Numbers will remain stored even in the event of losing power. 

steP 6:

  

recordinG the Voice messaGe

 

 Using 

star (*) 6

 You have a maximum of 

45 seconds

 in which to record one of the following 

messages. At the conclusion immediately press the

 “#” Key 

to stop recording and you will hear 

two beeps. If the two beeps sound before you finish, your message is too long and will need to be 
said a little quicker. 

(Your message can be changed at any time by repeating this procedure)

Voice oPtion 1. 

“This is (Name) of (full address including state) and I have pressed my CareAlert button and need 
emergency help. Press the star key on your phone to speak to me – if I do not respond, please take action 
to ensure my well-being. Should this message reach Emergency Services please connect this call to the 
Ambulance. Repeating, my name is (name) and my address is (address). This message is played twice. 
Press the star key now to speak to me. 

Voice oPtion 2: (this is onlY Used if YoU haVe an oUtdoor KeYsafe locK) 

“This is (Name) of (full address including state) and I have pressed my CareAlert button and need 
emergency help. Press the star key on your phone to speak to me – if I do not respond, please take 
action to ensure my well-being. My Key Safe Lock is located (say location) and the opening code is (give 
combination). Should this message reach Emergency Services please connect this call to the Ambulance. 
Repeating, my name is (name) and my address is (address). This message is played twice. Press the star 
key now to speak to me” 

Both message options can be read within 45 seconds. 

option 2 may need to be read at a faster pace. 

Summary of Contents for CA-0617





































Reviews: