Operation Evac Cover
1.
Pull out and fasten the Velcro straps so that the mattress
forms a tube around the user.
2.
Use the outer handles at the foot end of the mattress and turn
the mattress out from the bed.
3.
Slowly pull the user down on the floor.
4.
Pull on the outer handles at the foot end of the mattress.
5.
The user may now be moved, refer to local evacuation
routines.
4
Product description
Care of Sweden reserves the right to modify the product specification at any time.
The mattress is a combination of foam and air that operates without electricity.
1. Label “Head end” 2. Foam core
3. Tubing system 4. Air cells
5. Foam top part
4.1
Standards
The system has been tested and approved according to following standards where applicable
demands are fulfilled: SS-EN ISO 20342, SS-EN ISO 14971, SS-EN ISO 10993, EN 597-1, EN 597-2.
Note!
• If the velcro straps are not used, there is a risk of the user sliding/rolling down from the
mattress.
• Pulling at the foot end reduces the strain on the puller, meaning faster and safer
evacuation is possible.
• The arms of the user shall be inside of the velcro straps. This reduces the risk of the user
grabbing hold to something out of fear.
