9
CONNECTING YOUR INFOBOX TO THE
NETWORK
If you are using a wired connection to connect to your
internet service, this must be plugged into the Ethernet
port. If you are using a wireless/Wi-Fi connection there
is no need to connect a network cable.
POWERING UP YOUR INFOBOX
Connect the small round plug on the cable from the
power supply provided into the port on the
Infobox
marked ‘DC 12V/1.5A', then plug the power supply into
the wall socket and switch on.
You will have to select the correct input on your TV
to be able to see the following screens, to do this you
need to use your existing TV remote. To switch inputs
you will need to press whichever button
cycles through the list of inputs, this
could be labelled AV, INPUT, SOURCE, or
may look like this.
Your input will most likely be HDMI 1 or
HDMI 2, you will have the correct input
once you see the image shown on Page
10 of the manual on your screen. If you can, make
this the default input for your TV.
