AUDIO TONES
With the exception of the actions below, all other actions are followed
by a single tone to confirm that the headset has accepted the command.
Action
Tone
Enable/Disable Always On
One tone = Always On intercom
intercom
Two tones = Voice Controlled (VOX) intercom
Intercom on other side is
2 beeps to alert you that the other side is not
not enabled or off and you
available
start speaking
TROUBLESHOOTING
Problem
Action
Phone-Related Problems (Driver Unit with
Bluetooth
Phone)
Unsuccessful
Bluetooth
Pairing
1. If listed, delete scala-rider from your paired
device list of your phone.
2. Turn off the phone and headset.
3. Remove the battery from the phone, then place
the battery back in the phone.
4. Repeat the pairing process as described above.
I cannot hear stereo sound
The two speakers provide only dual mono signals.
Can’t answer calls or perform
1. Make sure that the scala-rider headset is turned
voice dialing by pressing the
ON and in standby mode with the blue Status
Control Button
Light slowly flashing.
2. Verify that the
Bluetooth
function on your phone
is set to ON.
12