Cardo Systems BK-1 DUO, User Manual, Page: 24 / 30

24
|
cardo
BK-1
NoTES:
• If Pairing is not completed within 2 minutes, the cardo BK-1 will return to Standby mode.
• Not all Bluetooth mobile phones can broadcast Bluetooth stereo music (A2DP), even if the phone has an MP3 player
function. Consult your mobile phone’s User Manual for more information.
• After pairing, you may need to tap the Mobile Phone Button to connect the
cardo BK-1
to the phone.
6.1b. PaIrING a GPS
• Receive GPS navigation instructions
NoTE: Not all Bluetooth GPS devices allow connections to Bluetooth audio devices. Please consult your GPS User
Manual for more information. If Pairing is not completed within 2 minutes, the
cardo BK-1
will return to
Standby mode.
1. Turn on your GPS.
2. Check the
cardo BK-1
is in Standby (single BLUE flash every 3 seconds).
3. Press for at least 4 seconds, until the RED light begins flashing rapidly.
4. Search for
Bluetooth
device on the GPS device by following the instructions in the GPS User Manual.
5. Once your GPS lists the “ cardo BK-1 ” as a discovered device, select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. Your GPS device will confirm that pairing has succeeded and the cardo BK-1 will begin flashing
slowly in BLUE.
IMPorTaNT:
If you wish to use a mobile phone with the
cardo BK-1
, pair the mobile phone directly to the GPS device.
Please refer to the GPS User Manual for instructions in pairing your GPS device to your mobile phone.
6.1c. MaKING aNd rEcEIVING PHoNE caLLS
answer a call
Tap or speak any word loudly to answer by VOX
reject a call
Remain silent for 15 seconds, or press for 2 seconds
End a call
Tap
Voice dial*
(if supported by phone)
Tap and follow the prompt from the Mobile
redial*
Tap twice
reconnect
Tap
INTErcoM coNFErENcE ModE
add/remove channel “a”
to/from a call
Tap while on a phone call
add/remove channel “B”
to/from a call
Tap while on a phone call
*This feature is not available during intercom or mobile calls