XRCISE STRESS ECHO MED
Technical and visual modifications as well as misprints reserved -
© 2017
by ERGO-FIT GmbH & Co. KG
6 9
Warnings
XRCISE STRESS ECHO MED
⊗
Read the user manual carefully before you start.
⊗
Before starting the exercise please check the power supply cord.
⊗
Check the wiring to external devices prior to workout.
⊗
Always connect the equipment to the power supply before using it and only use it
after a proper functional test.
⊗
Ensure that the power cords cannot be driven over.
⊗
Check whether all locking pins for the adjusting mechanisms and pads are locked
before the patient uses the device .
⊗
The machine is only to be used on the instruction of a physician and / or a supervisor.
The machine must not be used without the presence of a supervisor.
⊗
In case of nausea or dizziness, the patient has to stop training immediately and see
a physician.
⊗
Persons who wear a cardiac pacemaker or have health problems consult a
physician before using the machine.
⊗
Your patients have to wear only appropriate clothing and footwear during workout.
⊗
Advice your patient, not to take the feet off the pedals or jump from the machine
during the training
⊗
Only use the tilting mechanism with the adjustable feet locked .
⊗
Ensure that the tilting mechanism is only used with the hip support in place in order
to avoid damage to health.
⊗
Ensure a sufficient safety clearance before using the tilting mechanism.
⊗
In order to avoid injuries, talk to the patient before adjusting the seat and maintain
eye contact with the patient while adjusting the seat.
⊗
Don‘t lean on the cockpit or on the device covers, and don‘t perform any improper
movements on the device .
⊗
Switch off the machine after the workout and disconnect it..
⊗
Children must not use the machine without supervision and must keep away from
the machine and its moving parts.
⊗
Before every use, check the moving parts and the casing for damage. If the machine
is damaged, have it repaired immediately.
⊗
Do not cover the ventilation louvers. This can cause the machine to overheat.
⊗
Don‘t open any drives or controllers as this would void the warranty.
⊗
Repairs to energized parts may only be performed by a specialist using original
spare parts.
⊗
Do not touch the USB port, RS232 port or audio port or the connection SPO2
meassurement during the training