CARDIOSTRONG CST-TX90-2, Assembly And Operating Instructions Manual

Page: 7 / 48

7
TX 90
Safety Key
+ The equipment has an EMERGENCY STOP mechanism for your safety. The equipment may only
be operated when the safety key is properly attached to the contact point of the cockpit. The
equipment will automatically stop immediately if the safety key is no longer on the contact
point. That is why you should attach the safety key string with the clip to your clothing before
training. Remove the safety key from the cockpit with the help of the string if you would like to
quickly stop the treadmill, you can no longer handle the speed or an emergency occurs.
+ In order for the safety key to be released from the cockpit contact point in the event of a fall, the
clip of the safety key must be attached (fixed) to your clothing!
+ Prevent children from having access to the safety key.
1.3 Electrical safety
+ The equipment requires a 220 - 230V / 50 Hertz mains power supply.
+ The equipment should be connected directly to a grounded plug socket only by means of the
power cable supplied. The use of multi-socket adapters or similar is not recommended. Extension
leads must comply with local electrical safety guidelines. Always fully unwind the power cable.
+ The outlet should be secured with a fuse with a minimum value of „16 amperes, slow“.
+ In order to reduce the risk of an electric shock, always unplug the equipment from the mains
socket immediately after your workout, before assembly or dismantling, and before maintenance
or cleaning. Do not pull on the cable.
+ When plugged in, do not leave the equipment unattended at any time. To avoid use by anyone
unfamiliar with the usage instructions, the power cable should be removed when the equipment
is not in use.
+ Keep the power cable away from heat, oil and sharp edges. Do not route the power cable
underneath the equipment or under a carpet or rug, and do not place any objects on top of it.
+ Make no modifications to either the power cable or the mains plug.
+ If the power cable or the plug are damaged or defective, contact your authorized contract
partner. Do not use the equipment in the meantime.
+ Do not keep electrical devices (e. g., mobile phones) in close proximity to the console or the
control electronics, otherwise display values (e. g., pulse measuring) could be inaccurate.