CARDIOSTRONG CST-CB, Assembly And Operating Instructions Manual, Page: 12 / 20

12
HR Sensor Smart
2.4 Assembly of the Transmitter Battery
L
NOTICE
During the insertion of the battery: Make sure that the battery is first pressed against the side
contact (mark „+“ facing up) and then pressed into the battery compartment.
1. Slide the battery (CR2032) angled into the battery compartment (shown in Figure 2).
2. Check if the o-ring is already inserted in the battery cover to ensure the battery compartment
is water proof.
3. Attach the battery cover and turn it to the right to close it with a coin/ turn left to open it.
࣑
ATTENTION
Make sure to close the battery cover properly to prevent the battery from sweat and moisture.