CARDIOSTRONG CST-BX30-PLUS, Assembly And Operating Instructions Manual, Page: 19 / 48

19
Step 6: Adjusting the seat position
Height adjustment:
Loosen the knob (31) and pull it out in order to adjust the
height of the saddle tube. Release the knob and make sure
that it locks into one of the drill holes. Then tighten it again.
Horizontal adjustment:
Rotate the knob (17) under the seat until you can move
the seat forwards and backwards. Move the seat into the
desired position and tighten the knob again.
Step 7: Adjusting the handle
Rotate the lever (37) on the front of the handle until you
can adjust the tilt of the handle. Once the handle is in the
desired position, tighten the lever again.
Step 8: Connecting the equipment to the mains supply
ड ATTENTION
The equipment must not be connected to
a multiple socket, otherwise it cannot be
guaranteed that the equipment will be supplied
with sufficient power. Technical errors can result.
1. Connect the adaptor (15) to the fitness
equipment.
2. Plug the power plug into a wall outlet that
complies with the instructions in the chapter on
electrical safety.