Attaching Upper Monitors
The Upper Monitor can be installed on any piece of equipment.
For equipment with round handles or railing, Upper
Monitors are supplied with a build-in mounting block.
Align the Upper Monitor on the handle or rail as desired.
Use two of the supplied Plastic Wire Ties to attach the
Upper Monitor to the handle or rail.
Pull wire ties firmly to secure.
This method is the preferred method of attaching the Upper
Monitor to minimize interference with control panels and
displays.
For equipment with flat control panels but no hand
rails, SuperLock (a form of super strong Velcro) may
be used.
Determine the best mounting position.
Clean the mounting surface thoroughly.
Remove the protective cover from the adhesive strip.
Position the Upper Monitor and press firmly for the
adhesive to grip.
CAUTION: When attaching to a control panel, care should
be taken to avoid blocking access to controls or
illustrations.
Click here to go back to the Index.
Attaching Receivers
The Receivers can be installed on any piece of equipment.
IMPORTANT NOTE: Make sure the Receivers are mounted as high as possible in the vertical upright position
as much as physically possible, with the antenna on top.
