6
•
Fit the appliance into its surround (beneath a work-top or above another
appliance) by inserting screws an
d
plastic covers into the 2 holes that can be
seen in the frame of the oven when the door is open.
•
For the most e
f
ficient air circulation, the oven should be fitted according to the
dimensions shown in fig. 1
&
2 of page
9
.
•
The rear panel of the cabinet must be removed so that air can circulate freely.
The panel to which the oven is fitted should have a gap of at least
35
mm at the
rear.
The base of the cabinet under the oven must have a 400mm x 300mm
cut out. The kickboard in front of the oven must be fitted with a grille for airflow
(minimum clear opening 100mm²)
or an alternative means of air ingress.
IMPORTANT:
Isolate
your oven
before performing installation or
maintenance!
Installation should be carried out
in
accordance with
the instructions by
a
n electrician
. The manufacturer
declines all responsibility for any
damage to persons, animals or
things due to
incorrect
installation.
Fitting the appliance
Plastic cover
INDICATOR LIGHTS
The indicator lights situated above the control panel go on and off when the
heating elements are energised or de-energised. During the thermostatic
functioning of the oven, the neon light remains on until the pre-chosen temperature
is reached and it goes off when the temperature has been reached. When the
oven cools, the thermostat determines the re-energisation of the heating elements
with consequent re-lighting of the indicator lights. The internal oven light, will
remain on when any function is in operation.
Installing the Appliance
NB:
W
here ovens are to be
installed under
hobs, it is essential to follow
the instructions contained in the booklet supplied with the
hob.
