21
Under any circumstances, make sure the Induction cooker hob is well ventilated
and the air inlet and
outlet are not blocked. Ensure the Induction cooker hob is in good work state. As shown below:
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least
2
0mm
. Please select heat-
resistant work surface material to avoid larger deformation caused by the heat
radiation from the hotplate. As shown below:
L(mm)
W(mm)
H(mm)
D(mm)
A(mm)
B(mm)
X(mm)
900
520
62
58
74
0
490
mi
50 ni
mum
Note: The safety distance between the hotplate and the cupboard above the hotplate should
be at least
760
mm.
A(mm) B(mm)
C(mm)
D
E
760
50 mini
mum
20 mini
mum
Air intake
Air exit
5mm
x 800mm
NOTE: Ventilation by
cabinetmaker is essential
to prevent overheating
20 x 500mm