Cardinal Satellite Series, Technical And Operating Manual

Page: 35 / 56

8545-0964-0M Rev A

Satellite Series Technical and Operation 31
825 ID/TRUCK STORAGE, CONT.
RUNNING A TRANSACTION
1. Using a Temporary ID/Truck
1. On the main screen, press the ID
button or press “I” to access the ID/Truck Storage
ID/Truck entry screen (Figure 4).
2. Begin a first pass temporary truck transaction by:
1. Enter a truck ID and press the ENTER key or touch the ENTER button or
2. Press an EMPTY button or leave the ID entry field blank and press the ENTER key
to create an automatically assigned ID/Truck.
3. Repeat step 3.1.2.1 for the number of linked ids defined in setup (Figure 2).
4. When the maximum number of IDs/Trucks are entered or the print button is pressed,
the 825 will display “Printing First Pass” (Figure 7) and will print a first pass ticket.
Figure 7: Printing a first pass ticket
5. Repeat step 3.1.1.
6. Enter the ID/Truck from the ID entry list (Figure 4) or press the corresponding ID/Truck
button.
7. Touch the PRINT button to print a second pass ticket (Figure 8) and delete the
temporary ID/Truck
Figure 8: Printing a second pass ticket
2. Using a Permanent ID/Truck with Zero Stored Weight
1. Repeat steps 3.1.1 through 3.1.6.
2. Touch the PRINT button to print a second pass ticket (Figure 8).
3. The 825 will accumulate the permanent ID/Truck and reset the stored weight.
3. Using a Permanent ID/Truck with Stored Weight
1. On the main screen, press the ID
button or press “I” to access the ID/Truck Storage
ID/Truck entry screen (Figure 4).
2. Enter the ID/Truck from the ID entry list (Figure 4) or press the corresponding ID/Truck
button.
3. Touch the PRINT button to print a second pass ticket (Figure 8).
4. The 825 will accumulate the permanent ID/Truck and reset the stored weight.