DISPLAY ANNUNCIATORS
The annunciators are turned on to indicate that the scale display is in the mode corresponding
to the annunciator label or that the status indicated by the label is active.
Net
The “Net” annunciator is turned on to indicate that the displayed weight is in net mode.
Gross
The “Gross” annunciator is turned on to indicate that the displayed weight is in Gross mode.
(Minus Weight)
This annunciator is turned on when a negative (minus) weight is displayed.
lb
Red LED at the right of “lb” will be turned on to indicate the displayed weight is in pounds.
kg
Red LED at the right of “kg” will be turned on to indicate the displayed weight is in kilograms.
Lo
(Low Battery)
When the batteries are near the point they need to be replaced, a low battery indicator on the
display will turn on. If the voltage drops too low for accurate weighing, the scale will
automatically shut off and you will be unable to turn it back on. When the low battery indicator
is displayed, the operator should replace the batteries or remove the batteries and plug the
power supply into the scale and then into the proper electrical wall outlet.
8525-M300-O1 Rev-B
x
DR550 Operation
3
