Cardinal C15, Operation Manual, Page: 16 / 24

8526-M260-O1

C Series Operation
10
OPERATION, CONT.
Accumulator
Adding to the Weight Accumulator
1. With the scale in the Weight mode and displaying zero weight, place the item on the
scale platform.
2. Press the M+ key to add to the value of the Weight Accumulator.
3. The Avg Piece Weight display will change to show the accumulator values and the ADD
annunciator will be illuminated(to indicate the addition to the accumulator has taken
place). After 3 seconds, the scale will return to the weight mode.
4. Remove the item from the scale.
5. The scale is ready for the next counting or weight operation.
NOTE: Additional Weight Accumulator additions can not take place until the current
weighing operation (scale weight returns to zero) has been completed.
Displaying the Accumulator
With the scale in the Weight mode and displaying zero weight, press the M+ key to
display the content of the accumulators. The values of the accumulator will be displayed
for 3 seconds, then return to the Weight mode display.
Clearing the Accumulator
With the scale in the Weight mode and displaying zero weight, press the MC key. The
accumulator will be reset to zero.