8200-M554-O1 Rev C 2XX-EIP Installation and Setup Manual
8
CONFIGURE THE PLC USING RSLogix5000, CONT.
In the next dialogue window, RSLogix 5000 will ask for information regarding the
communication to the module. First, enter a name for the module. This name will create a tag
in RSLogix5000, which can be used to access the memory location in the PLCs memory
where the data for the module will be stored. With the name entered, press Next.
In the next dialogue box enter a value for the time between each scan of the module, called
Request Packet Interval (RPI). Make sure that “Inhibit Module” isn’t checked. After this, press
Finish.
