Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 62 / 378

2-6
Getting Started
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
Preparing Syringe and Administration Set (
Syringe Module
)
For instructions on how to go from checking in a Syringe
Module to preparing it for an infusion setup, reference
"General Setup and Operation".
1. Prepare syringe (reference "General Information",
"Compatible Syringes") in accordance with
manufacturer’s directions for use.
2. Prepare administration set (reference Set Compatibility
Card, provided separately) in accordance with
manufacturer’s directions for use.
3. Attach upper fitting of administration set to syringe tip.
Use only standard, single-use,
disposable syringes (with luer-lock
connectors) and administration sets,
designed for use on syringe pumps.
The use of any other
syringe or
administration set may cause
improper instrument operation,
resulting in inaccurate fluid delivery
or pressure sensing, or other
potential hazards. For a list of
compatible syringes, reference
"General Information", "Compatible
Syringes". For a list of compatible
administration sets, reference the
Set Compatibility Card (provided
separately).
WARNING
Preparing Administration Set (
Pump Module
) (Continued)
Priming (Continued)
6. To prime tubing and clear air from injection sites and
tubing fitments, slowly open roller clamp.
7. When priming is complete, close roller clamp.
8. Verify no fluid flow.
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL OFF
PAUSE
RESTART
RATE (mL/h)