Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 360 / 378

8-6
Troubleshooting and Maintenance
Alaris
®
System Directions for Use
CI Board Accessory Section
Reference the PC Unit and module-specific Sections of this
DFU
for the following references:
Alarms, Errors, Messages
Audio Characteristics
Definitions
Radio Frequency Note
The CI Board has self-testing capability, both at power on and
during normal operation. If communication with the CI Board
fails, a visual message displays to indicate a communication
error. A communication error to an outside access point does
not cause a Alaris
®
System alarm or visual message.
Alarms, Errors, Messages
NETWORK COMM ERROR Communication error occurred
between CI Board and Alaris
®
Server.
Power Alaris
®
System off and then
back on. If error is repeated:
• To continue manual-only
operation, press
CONFIRM
soft
key.
• Replace PC Unit as soon as
possible.
• Refer instrument to be serviced
by qualified personnel, to:
- reprogram/reconfigure
CI Board
- verify wireless boot version
- replace CI Board, as
necessary
Message Meaning Response
Messages