Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 324 / 378

6-4
Programming
Alaris
®
System Directions for Use
Auto-ID Module Section
•
CLASS 1 LED PRODUCT
: Do not
stare into the beam or allow
beam to strike patient's face.
• Always verify that information
displayed on the PC Unit
matches scanned data.
CAUTIONS
NOTES:
€
Automatic display of Patient ID Entry screen should be
enabled in the System Configuration settings.

If the patient
ID
is not entered at this time, it can still be
entered later.
‚
Patient
ID
may be entered manually using the PC Unit keypad
(reference PC Unit Section of this
DFU
).
Patient Identification (Continued)
New Patient (Continued)
6. To scan bar code on patient identification band, press
scan trigger on hand-held scanner.
 ‚
• If scan is successful, an audible tone sounds and
patient
ID
displays on Main Display.
7. To unlock panel, clinician's
ID
must be scanned.
To associate the PC Unit with a patient
ID
when patient
ID
screen is not shown:
1. Attach hand-held scanner to connection port on Auto-ID
Module. Ensure secure circuit connection.
2. Press
OPTIONS
key.
• Systems Options menu appears.
While Infusion is in Progress
SILENCE
OPTIONS
1
4
7
CLEAR
2
5
8
0
3
6
9
.
ENTER
CANCEL
SYSTEM
ON
Scan Trigger