Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 323 / 378

READY
SCAN
CANCEL
Programming
Programming
6-3
Patient Identification
Alaris
®
System Directions for Use
Auto-ID Module Section
New Patient
Associating the PC Unit with a patient provides a means of
identifying the device(s) that will deliver
IV
medications to that
particular patient.
To associate the PC Unit with a new patient
ID
:
1. Attach hand-held scanner to connection port on Auto-ID
Module. Ensure secure circuit connection.
Use only the hand-held external
scanner supplied by Cardinal
Health. Using other accessories
may result in
increased emissions
or decreased immunity of the
Alaris
®
System.
WARNING
2. Power on PC Unit.
3. To select New Patient? , press Yes soft key.
4. To accept current profile, press Yes soft key.
OR
To proceed to profile selection screen, press No soft key.
• Patient ID Entry screen appears.
€
• Green
READY LED
illuminates, indicating system is
ready to scan.
Ready to
scan indicator
5. To accept profile selection, press
CONFIRM
soft key.
• Panel Lock screen appears.