Cardinal Health Alaris 8000 Series, Directions For Use Manual, Page: 15 / 378

NOTES:
€
Previous infusion parameters are automatically cleared after
8
hours.

If any of the following conditions are observed, the PC Unit or
the affected attached module must be removed from use and
inspected by qualified personnel:
•
LED
segments are not illuminated during system-on test.
• Indicator lights do not illuminate.
• Appropriate module identification (
A
,
B
,
C
or
D
) is not
displayed.
• Audio tone does not sound.
• Main Display does not appear backlit, appears irregular, or
has evidence of a row of pixels not functioning properly.
If the affected module operates normally when it is attached
via an alternate
IUI
connector, it may be used until a
replacement module can be substituted.
General Setup and Operation
1-5
Alaris
®
System Directions for Use
PC Unit Section
1. Connect PC Unit to an external
AC
power source.
2. Press
SYSTEM ON
.
3. System self test begins:
• Diagnostics test causes all
LED
display segments and
Status Indicator lights of attached module(s) to
illuminate briefly.
• Power Indicator illuminates.
• Appropriate module identification (
A
,
B
,
C
or
D
)
displays on attached module(s).
• An Audio tone sounds.
• If
PM
Reminder option is enabled and scheduled
preventive maintenance is due,
MAINTENANCE
REMINDER
screen appears.
• At completion of system-on test, New Patient? screen
appears.
Start-Up
Powering On System € 