http://www.remotecontrol-express.com
CARDIN S449 QZ2 –
Programming of your new remote control
There are several methods for programming your new
From a remote control that has already been programmed
1.
Approach your motor so you are
2.
With a sharply pointed object, press the hidden button from your already
remote control (diagram above, P1). The receiver emits a beep. Let the button
3.
Press a button on your already
the button go.
4.
Press the button you wish to program
beeps. Let the button go
5.
Repeat this procedure for each button you wish to program.
6.
Wait 10 seconds.
7.
Your new remote control is programmed.
Programming Manual
express.com
-
TEL :
+44 (0) 207 399 7782 - FAX :
+44 (0) 207 927 3151
– S449 QZ4 – S449 QZ4M - S486 QZ2
ming of your new remote control:
methods for programming your new remote control.
hat has already been programmed:
Approach your motor so you are standing a few feet away from it.
With a sharply pointed object, press the hidden button from your already
remote control (diagram above, P1). The receiver emits a beep. Let the button
your already-programmed remote control. The receiver emits a beep. Let
Press the button you wish to program on your new remote control. The receiver emits 2
go.
Repeat this procedure for each button you wish to program.
control is programmed.
+44 (0) 207 927 3151
S486 QZ2 - QZ4
With a sharply pointed object, press the hidden button from your already-programmed
remote control (diagram above, P1). The receiver emits a beep. Let the button go.
The receiver emits a beep. Let
The receiver emits 2