background image

Package Air Conditioners

*+# :  

9) Never plug or unplug the power cable directly to start or stop the air-conditioning unit.

10) Please take constant care to check if the mounting rack is damaged after long use.

11) Never modify the air conditioner. Please contact the dealer or professional installation workers for 

repair or relocation of the air conditioner.

 Caution:

1) Before installation, please check the power supply for compliance with the ratings on nameplate. Check 

the power safety as well.

;<       

 "  

3) Main power must be securely earthed to ensure effective grounding of air conditioner unit and avoid 

the risk of electric shock. Please do not connect the earthing cable to coal gas pipe, water pipe, lightning rod 

or telephone line.

4) Once started, the air conditioner shall not be stopped at least after 5 minutes or longer; otherwise the oil 

return to compressor may be affected.

5) Do not let the child to operate the air conditioner unit.

6) Do not operate the air conditioner unit with wet hands.

>?  "    

8) Please disconnect the main power if to put the air conditioner unit out of use for a long period.

@ ?    $        # # " "  

moisture.

10) Please do not foot on or place any goods on air conditioner unit.

11) After electrical installation, the air conditioner unit shall be energized for electrical leakage test.

12) An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be 

$"

13) The appliance shall be installed in accordance with national wiring regulations.

14) The temperature of refrigerant circuit will be high, please keep the interconnection cable away from 

the copper tube...

Summary of Contents for CGK series























Reviews: