CARBONE SuperTig250EX, Operator'S Manual

Page: 9 / 43

A-1 INSTALLATION A-1
TECHNICAL SPECIFICATIONS
-
max. rated Output Amps @% Duty Cycle (Based on a 10 minute cycle) (Example; 200A@35% for DC Stick
and 250A@60% for AC/DC Balance TIG)
MODEL SuperTig250EX
Voltage 1~AC110V 50/60Hz 1~AC220V 50/60Hz
INPUT
Fuse rating 42A 40A
No-load Voltage 80V
Base current Adjusting Range 5~150A 5~250A
AC balance 10%~90 %
AC Square Wave Frequency 20~250Hz
Rated Duty Cycle 60%
Pre Flow 0-10s
Start Amps 5-150A 5-250A
AC
TIG
End Amps 5-150A 5-250A
AMP Adjusting Range 5~150A 5~250A
Rated Duty Cycle 60%
Current Up-slope Time 0~10S
Current Down-slope Time 0~25S
pulse(Base/AMP) Current Ratio 5%-95%
Pluse Time On 0.1~0.9
Pluse Frequency 0.5~25(25~250)Hz
post Flow Time 0~25s
Arc starting Mode high frequency arc striking
Pre Flow 0-10s
Start Amps 5-150A 5-250A
DC
TIG
End Amps 5-150A 5-250A
No-load Voltage 80V
Current Range 20-120A 20-200A
Rated Output Current 120A 200A
DC
STICK
Rated Duty Cycle 35%
Efficiency ≥ 83%
Mass 28kg
Protection Class of enclosure IP21S
Outline Dimensions mm
3
470x235x435