4.7.9
Soft start Timer
Operation
Action
Indication
To RUN
Timer
Press and quickly release
+
Indicator – RUN = ON
Scrolling Display – Timer
Running
Static Text - OFF
To HOLD
timer
Press and quickly release
+
Indicator – RUN = Flashing
Scrolling Display – Timer
Hold
Static Text - OFF
To switch off
Timer/
Cancel
Press and hold
+
for more than 1
second
Indicator – RUN = OFF
Scrolling Display – None
Static Text - OFF
Timer Ended
Indicator – RUN = OFF
Scrolling Text – Timer End
Running Soft Start Timer
When the soft start timer is set to operate, the scrolling display will indicate “timer
running” and the setpoint temperature, not the soft start setpoint.
4.7.10
Power Failure While Using Soft Start Timer
If there is a power failure while the timer is operating and the power is subsequently
restored, the timer will reset and will re-run from the power on time.
4.7.11
Ramp Rate with Soft Start Timer
It is not recommended that the ramp rate function be used with a soft start timer.
Note: If the temperature is already above the threshold when the timer is set to
operate, the timer will time out immediately.
4.7.12
Time Remaining
The time remaining of any 'Timer' mode can be checked at any time while a timer is
active.
To view the time remaining, press scroll
until the display shows T.REMN <TIME
REMAINING>.
Note: The time remaining can be modified at any time while the count down timer is
operating by pressing the up
or down
key while the time remaining function is
active.
4.7.13
Alarms
Alarms are used to alert the operator when a pre-set level has been exceeded or a
function error has occurred such as a sensor break. They are indicated by a scrolling
29
4.0 3216CC Controller
