13
7. OPERATION
Gently press your back against the massage device to start with. Then make sure that you are in a
comfortable position before gradually shifting your weight onto the massage device.The massage
must be pleasant and relaxing at all times. Stop the massage or change your position or the contact
pressure if you find it is painful or unpleasant.
• Do not force any part of your body, in particular your fingers, between the rotating massage
heads and their mountings in the device.
• Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the
massage heads can move to the left and right of your spinal column.
• Switch on the massager with the POWER button. The device starts automatically with the
Shiatsu massage
You can select other settings as described below:
1. Shiatsu massage
Press the
SHIATSU
button (button 2). Select the desired massage region with
FULL BACK
,
UP-
PER BACK
and
LOWER BACK
.
Spot massage, i.e. Shiatsu massage without vertical movement, can be selected by pressing one of
the two SPOT buttons (button 4). The position of the localised massage can be changed by pressing
and holding one of the two SPOT buttons until the desired position is reached.
2. Rolling massage
Press the ROLLING button (button 3). Select the desired massage region with FULL BACK , UPPER
BACK and LOWER BACK.
Massage Width:
When using the rolling massage, massage width are available, which can be
selected using the WIDTH button(button 5).
Vibration function:
Press the VIBRATION button (button 6) to switch on the Vibration function.
Heating function:
Press the HEAT button (button 7) to switch on the heating function of the massa-
ge heads.
• Do not use the massage device for longer than 15 minutes and then allow it to cool. Using
the device for longer can over-stimulate the muscles and cause tension instead of relaxation.
The massage can be finished at any time by pressing the POWER button. Please note that
on switching off, the massage heads first return to the starting position at the lumbar region.
Once this position is reached, the device switches off.
• If the device is stopped be pressing a massage area button twice, it also returns to the star-
ting position after 15 minutes and then switches off.
• Do not disconnect the device from the mains supply during operation. Always switch it off
first and wait until it has returned to the initial position.
• Disconnect the power supply unit plug from the mains after using the device.
Note
• The device has an automatic shut-off mechanism set to a maximum operating period of
15 minutes.
