Carbest 825030, User Instruction

Page: 12 / 19

Carbest Solarkoffer | Foldable Solar Kit 825030
12
UK
INSTALLATION INSTRUCTIONS
• Unzip the protective case and remove the folded solar panel. Unclip
the two latches on the side of the unit and unfold the two panels
outward. Extend the support legs and lock in place using the wing nut.
Pull the controller swivel bracket from the back of the panel and allow
it to move freely (this keep heat away from the back of the panel).
1. Fully extend battery leads and connect the battery clips to the +
positive (red) & - negative (black) battery terminals on a 12V battery.
Ensure that the connections are secure.
2. When you connect the kit to the battery, the LCD display on the
solar controller will turn on automatically.
NOTE|
The kit should be connected to a battery generating at least
8 V to start the solar controller. If your 12 V battery is fully
discharged, charge it for a short period of time by other means to
reach 8 V. Please read the following information about the solar
charge controller LS1012EU carefully before you connect the battery
clips to the battery terminals of your 12 V battery.
SAFETY INFORMATIONS SOLAR CHARGE CONTROLLER LS1012EU
• Read all of the instructions in the manual before installation.
• DO NOT disassemble or attempt to repair the controller.
• Power connections must remain tight to avoid excessive heating from
a loose connection.
• Only charge batteries that comply with the parameters of controller.
• Risk of electric shock, the PV and load can produce high voltages
when the controller is working.
OVERVIEW
The LS1012EU controller is a PWM charge controller with USB
output that adopts the most advanced digital technique. It’s an
easy operation and cost efficient controller featured as:
• 3-Stage intelligent PWM charging: Bulk, Boost/Equalize, Float
• Support 3 charging options: Sealed, Gel, and Flooded
• Battery status LED indicator can indicates battery situation
• Battery temperature compensation function
• With humanized settings, operation will be more comfortable and
convenient
• The USB will provide power supply that can charge for electronic
equipment (LSE series only)
• Battery type and load output can be set via button
!