ENGLISH - 1
4
Incorrect setting causes deterioration of reception performance.
※
6. Functional description
6-1. Get ready to use
b.
c.
When HOME LED becomes solid this means the antenna is ready to operate
(If the antenna is not at HOME, HOME LED blinks while coming back HOME)
To power on the unit, press POWER button and check LEDs are lit.
To power off the unit, press and hold POWER button till all LEDs are lit,
the unit will be off when the button is released
a. All satellite LEDs blink and then system is displayed like below image
Software ver. (Binary code)
Dish Type : 65cm(
○●
) /85cm(
●○
)
**Make sure that Dish type LED matches to
the Dip switch setting from (b.)
DiSEqC On(
●
) / Off(
○
)
STB Power Detection On(
●
) / Off(
○
)
** The function has to be On while STB is On/Off.
HOME LED
** For auto skew model : Auto skew function ON(
●
) / OFF(
○
)
Power Button
See below table to find the model and match the controller has correct pre-setting as
needed.
You should leave as it is and do not change setting as own discretion unless mismatch with
the model.
2
3
4
65cm
Model
Antenna
85cm
1
↓
↑
2
#2,4 down
Auto skew
#1,4 down
3
4
1
↓
↑
2
3
4
Controller Back
1
↓
↑
2
#2 down
Standard
#1 down
3
4
1
↓
↑
Summary of Contents for 49631
Page 2: ......