background image

12

 

Carbest 4-Kammer Druckpumpe | Diaphragm Pump | 

620560

UK

16  As the water supply pump is non-essential, reference the wire Chart under 

the electrical information Be sure to have the correct wire sizing for the 
length of wire you are using 

17  After installation, check the voltage at the pump motor Voltage should 

be checked when pump is operating Full voltage must be available at the 
pump motor at all times 

Notes

1  Flexible potable water hose or PEX tubing is recommended instead of rigid 

piping at pump lf you choose to use rigid piping, provide a short length of 
hose between pipe and the pump to avoid noise and vibration 

2  We do not recommend the use of metal fittings When possible, use the 

provided plastic fittings 

3  Do not adjust the bypass personally without the help of technician 
4  Lack of sanitizing and maintenance is one of the main reasons of under 

performance of the pump Please do maintenance and winterize the pump 
at appropriate times, especially before and after a period of storage 

ABOUT THE BYPASS

Please consult a professional technician in the case that the bypass needs 
adjustment lmproper adjustment of the bypass may damage the pump 
The bypass comes preset for optimal operation of the pump lf your application 
calls for a different setting for the bypass, you may change it yourself Carefully 
tighten the screw to increase or loosen the screw to decrease the minimum 
operational pressure of the bypass 

CAUTION

!

 

 Please do follow the instruction manual to install the product. Any 
action outside what is recommended in this manual may bring damage 
to the pump. Any inappropriate installation or operation that causes 
the pump damage is not covered by warranty. 

WARRANTY

The warranty period is 36 months Reimo reserves the right to rectify eventual 
defaults The guarantee is excluded for all damages caused by faulty use or 
improper handling

Liability limitations:

In no case Reimo will be reliable for collateral-, secondary- or indirect 
damages, costs, expenditure, missed benefits or missed earnings The 
indicated sales price of the product is representing the equivalent value of 
Reimo’s liability limitations

Summary of Contents for 4-KAMMER DRUCKPUMPE

















Reviews: