30
convection air. The air grates should never be blocked.
-
Don’t smother the fire suddenly with water, but let it burn out, consuming the wood load.
-
The appliance must be installed on floors with sufficient bearing capacity.
-
Remove cooled ashes from the stove when the fire is out. Using an ash bucket is recommended as there may
be burning embers in the ashes.
-
Observe the minimum safety distances
from nearby combustible materials:
In front of the appliance: minimum 160
cm.
On the sides of the appliance: minimum
60 cm.
-
Do not use flammable liquids for lighting, maintain them far from the chimney.
-
Flammable materials cannot be used in the installation: not touching the stove, nor in the interior of the
chimney chamber.
-
On days with adverse draught conditions (very low atmospheric pressure, heavy frosts), or when the flue is
very cold, or in chimneys with a poor draught, you can help the draught to start before lighting the fire by
heating the flue:
1. Prepare the wood for lighting inside the wood burner.
2. Place a firelighter or a sheet of newspaper on the deflector at the start of the flue and set fire to it.
3. After a few seconds, when the chimney draught starts, light the wood as instructed.
6.
DATA SHEET
Model:
KRONOS 100
DC
KRONOS 80
DC
KRONOS 70
DC
RK 100 DC
RK 80 DC
Efficiency:
79%
79,0%
82,0%
79%
79,0%
Nominal output:
15,3 kW
14 Kw
12,7 Kw
15,3 kW
14 Kw
Emission CO at 13% O2
0,10%
0,10%
0,08%
0,10%
0,10%
Fuel load for nominal output:
3 Kg
2,6 Kg
2,3 Kg
3 Kg
2,6 Kg
Reloading interval for nominal output:
43 min
43 min
41 min
43 min
43 min
Maximum load:
4 Kg
3,8
3,6 Kg
4 Kg
3,8
Weight in Kg.
150 Kg
125 Kg
115 Kg
215 Kg
181 Kg
Pedestal for RK models
21 Kg
21 Kg
Necessary flue draft:
12 Pa
12 Pa
12 Pa
12 Pa
12 Pa
Flue gas temperature:
267 ºC
267 ºC
219 ºC
267 ºC
267 ºC
Rockwool insulation
