6
1. UNPACKAGING CARTON PACKAGE –
Please carefully unpack
carton & check all loosed parts are in order per part lists.
2. ASSEMBLY TABLE STAND –
Please refer
to picture right for complete table stand
assembly.
3. ASSEMBLY TABLE TOP WITH STAND ASSEMBLY–
Fasten 4
table bottom corners by screws with stand.
(4 screw holes in back of table top)
(Complete setup)
4. ASSEMBLY ROUTER TO TABLE INSERT
4.1 Remove insert by unfastened 4 screws on insert top, below Left.
4.2 Attach & secure router ring edge (using sketch router instead on
picture) on 4 clamp pieces by tightened 4 wing nuts, check sketch
picture below Right.
4.3 Table inserts & clamps are applicable for various sizes or brands
of routers. Fitting various motor specifications range from 3/4HP
up to 5HP motor.